Engineered Certification and Inspection (ECI) is the re-inspection and certification of equipment to ensure compliance with the manufacturer’s design and operating ratings. At Red Flame Industries Inc, our NDT (Non-Destructive Testing) inspectors perform a thorough inspection of your equipment’s structural welds, pivots, hydraulic mounts, and lifting arms to ensure no dents, cracks, bends, or capacity-altering damages have occurred. Inspections are completed using various techniques of magnetic particle (crack) inspections, visual techniques, and spacing measurements.

Original Article Source Credits: Canada.ca, https://www.canada.ca/

Article Written By: NA

Original Article Posted on: NA

Link to Original Article: https://www.canada.ca/en/environment-climate-change/services/canadian-environmental-protection-act-registry/publications/code-practice-storage-tank-systems/part-6.html

Original Article Source Credits: About Pipelines, https://www.aboutpipelines.com/

Article Written By: NA

Original Article Posted on: 2nd June 2021

Link to Original Article: https://www.aboutpipelines.com/en/blog/making-connections-pipeline-construction-in-the-city/

Original Article Source Credits: Corrosionpedia, https://www.corrosionpedia.com/

Article Written By: Mohamed Adel Mohamadein 

Original Article Posted on: 5th February 2021

Link to Original Article: https://www.corrosionpedia.com/ac-induced-corrosion-of-buried-pipelines/2/7256

Original Article Source Credits: About Pipelines, https://www.aboutpipelines.com/

Article Written By: NA

Original Article Posted on: 9th June 2021

Link to Original Article: https://www.aboutpipelines.com/en/blog/the-quest-for-net-zero-turning-hot-air-from-pipeline-operations-into-clean-electricity/

Meet Jason Wiebe, the RT II and MT II Technician for the Non-Destructive Testing service at Red Flame Industries Inc. Jason has been with Red Flame Industries Inc. for over four years and he has a promising future ahead. 

Original Article Source Credits:   Corrosionpedia , https://www.corrosionpedia.com/

Article Written By:  Della Anggabrata

Original Article Posted on:  March 29, 2021

Link to Original Article:  https://www.corrosionpedia.com/performing-a-fitness-for-service-assessment-of-pressure-vessels/2/7279

Compression-type steel repair sleeves have a significant history of use for the repair of several types of piping anomalies. When properly installed, they have proven useful for the reduction of anomaly propagation and failure by imposing a compressive hoop stress in the pipe wall, including the anomaly. CSA Z662-2019 permits the use of compression-type repair sleeves for a range of anomalies including corrosion, mechanical damage, axial cracks, and some weld anomalies.

Meet Johnathan Hardy, a Red Seal Pipefitter by trade and a Lead Technician at Red Flame Industries Inc. Johnathan began his career at Red Flame Industries three years ago and continues to have a bright future ahead. 

Original Article Source Credits:   About Pipelines , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  NA

Link to Original Article:  https://www.aboutpipelines.com/wp-content/uploads/2016/07/Why-Canada-Needs-New-Pipeline-Capacity-to-Water.pdf

Original Article Source Credits:  About Pipelines , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  FEBRUARY 17, 2021

Link to Original Article:  https://www.aboutpipelines.com/en/blog/setting-new-standards-for-pipeline-engineers-with-help-from-the-land-down-under/

Original Article Source Credits:   The Process Piping , https://www.theprocesspiping.com/

Article Written By:  The Process Piping

Original Article Posted on:  NA

Link to Original Article:  https://www.theprocesspiping.com/reducers-in-process-piping/

Original Article Source Credits:    About Pipelines , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  MAY 6, 2020

Link to Original Article:  https://www.aboutpipelines.com/en/blog/measures-to-keep-essential-pipeline-control-room-operators-safe-from-covid-19/

Original Article Source Credits:   About Pipelines , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  JULY 29, 2020

Link to Original Article:  https://www.aboutpipelines.com/en/blog/pipelines-a-valuable-lifeline-for-canada/

Original Article Source Credits: aboutpipelines, https://www.aboutpipelines.com 

Article Written By: NA 

Original Article Posted on: NA 

Link to Original Article: https://www.aboutpipelines.com/en/blog/pipelines-in-2021-helping-canada-tackle-new-challenges-and-opportunities

Original Article Source Credits:  About Pipelines  , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  NA

Link to Original Article:  https://www.aboutpipelines.com/en/pipeline-101/whats-in-the-pipelines/natural-gas-lines

Original Article Source Credits:  About Pipelines   , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  DECEMBER 16, 2020

Link to Original Article:  https://www.aboutpipelines.com/en/blog/2020-a-look-back-at-progress-for-pipelines/

Meet Jamie Hanson, our Operations Optimization Manager at Red Flame Industries Inc. in Red Deer. Jamie has been a vital part of the Red Flame team for the past ten years and continues to surprise us. 

Original Article Source Credits:   Corrosionpedia , https://www.corrosionpedia.com/

Article Written By:  Kasay Mwiks

Original Article Posted on:  December 7, 2020

Link to Original Article:  https://www.corrosionpedia.com/2/4503/corrosion-prevention/causes-and-prevention-of-corrosion-on-welded-joints

Original Article Source Credits:    About Pipelines , https://www.aboutpipelines.com/

Article Written By:  NA

Original Article Posted on:  DECEMBER 9, 2020

Link to Original Article:  https://www.aboutpipelines.com/en/blog/responsible-reliable-resilient-thats-canadas-pipeline-industry-in-good-times-and-bad/